Did you do the correct way to open the summer mode of the wall mounted boiler?
- Date:2024-03-18 12:11:16
- Views:7
The wind outside the window blows the leaves, bringing a hot and fresh taste. Yes, summer has arrived! Eating a chilled watermelon in the scorching summer is quite comfortable, and taking a shower can wash away the stickiness all over. Summer is the peak season for water usage, so remember to set your household wall mounted boiler to "summer mode".
What is the 'Summer Mode'?
Common household wall mounted boilers have winter mode and summer mode. The winter mode has two functions: heating and domestic hot water; In summer, you can switch to summer mode and only use the hot water function.
2、 What is the appropriate temperature for hot water in summer?
The water temperature in summer is relatively high, so the hot water temperature of the wall mounted boiler does not need to be set too high. It is recommended to set it at 40 ° C to 45 ° C. If the actual use feels that the temperature is too low, it can be adjusted appropriately, but the maximum should not exceed 60 ° C.
Setting the water temperature too high can accelerate the aging and damage of hot water pipelines, affecting their service life; It can also overload the wall mounted boiler and cause malfunctions; At the same time, internal scaling is more likely to occur, affecting heat transfer efficiency and increasing gas costs.
3、 Pay attention to changes in water pressure
Affected by thermal expansion and contraction, higher temperatures in summer can cause slight fluctuations in the water pressure of wall mounted boilers. The normal water pressure range should be between 1BAR and 1.5BAR. If the water pressure is too low, water should be replenished, and if it is too high, water should be drained.
4、 Pay attention to full water maintenance
In summer, when using a wall mounted boiler, it is also necessary to keep the heating system full of water, and it is not recommended to drain the water from the underfloor heating pipes or radiators. This can ensure normal water pressure and prevent corrosion and rusting of the heating system.
5、 Avoid frequent switching of wall mounted boiler power supply
In summer mode, due to the use of only domestic water, the frequency of wall mounted boiler usage is relatively reduced, but the equipment system must also be kept powered on. Under normal standby conditions, wall mounted boilers only consume a portion of electrical energy to protect the normal operation of the system and ensure safe use. If there is no one living in the house for a long time, the gas valve can be closed.
Turn on the "summer mode" of the wall mounted boiler, set the appropriate temperature, and pay attention to daily maintenance to enjoy comfortable hot water for daily life








